Products

1 Core

1 to 4 fibers G.657A1 or G.657A2 250um fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) or Steel wires are placed at two sides. Then the cable is completed with a black or white LSZH sheath.

1 Core

1 to 4 fibers G.657A1 or G.657A2 250um fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) or Steel wires are placed at two sides. A steel wire as the additional strength member is also applied Then the cable is completed with a black LSZH sheath.

All-Dielectric Self-Supporting (ADSS)

OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um fibers are positioned in a PBT loose tube. Tubes & Fillers (If necessary) are standed around a FRP central strength member into a compact and circular cable core. The cable core is filled with the filling compound to protect it from water ingress, over which a PE inner sheath and aramid yarn strength members. The cable is completed with a PE outer sheath.

Figure 8 Fiber Optic cable-Multi Loose tube type

OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um fibers are positioned in a PBT loose tube. Tubes & Fillers (If necessary) are standed around a steel wire or FRP central strength member into a compact and circular cable core.The Corrugated Steel Tape (CST) is longitudinally applied over the cable core. The cable is completed with Polyethylene (PE) jacket .

Single Jacket Multi Loose Tube Dielectric Fiber Optic Cable

OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um fibers are positioned in a PBT loose tube. Tubes & Fillers (If necessary) are standed around a FRP central strength member into a compact and circular cable core. The cable is completed with Polyethylene (PE) or LSZH jacket.

Single Jacket Central Loose Tube Armored Fiber Optic Cable

2 to 24 fibers OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um Single loose tube metallic Corrugated Steel Tape (CST) armored outdoor rodent resistand duct or aerial cables with two steel wire strength members each side, and Polyethylene (PE) or LSZH jacket.

Single Jacket Multi Loose Tube Armored Fiber Optic Cable

OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um fibers are positioned in a PBT loose tube. Tubes & Fillers (If necessary) are standed around a steel wire or FRP central strength member into a compact and circular cable core.The Corrugated Steel Tape (CST) is longitudinally applied over the cable core. The cable is completed with Polyethylene (PE) jacket or LSZH.

Double Jacket Multi Loose Tube Steel Tape Armored Fiber Optic Cable

OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um fibers are positioned in a PBT loose tube. Tubes & Fillers (If necessary) are standed around a steel wire or FRP central strength member into a compact and circular cable around the cable core. An Aluminium Polyethylene (APL) is applied around the cable core,which is filled with the filling compound to protect it from water ingress, over which with a thin PE sheath is applied. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.

Indoor Tight Buffered Distribution Fiber Optic Cable

2 to 24 fibers OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode900um tight buffer fibers, aramid yarn and PVC or LSZH jacket form the Indoor Tight Buffered Distribution Fiber Optic Cable.

Indoor Breakout Fiber Optic Cable

2 to 12 fibers OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode900um tight buffer fibers, aramid yarn and PVC or LSZH jacket form the Subunit cable. Subunits are standed around a FRP (Central Strength Member) with a longitudinal swellable tape under the outer jacket.

MTP/MPO Truck Cable Single Jacket Micro type (2-24Cores)

2~24 cores OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um fibers, aramid yarn and LSZH jacket form the MTP/MPO optic truck cable.

Simplex Armored Fiber Optic Patch Cable

Round Duplex Armored Fiber Optic Patch Cable contains 2 core 900um tight buffer fibers, SUS flexible spring tube, Aramid yarn strength member and PVC or LSZH jacket.

Fiber Optic Distribution Frame (ODF)

Fiber Optic Distribution Frame used for final termination or distribution of optical fibers. The fiber guidance ensures large bend radius.

PLC Splitter-Insert Type

It can distribute the optical fiber signal to all ports evenly. The loss is insensitive to wavelength and can meet the transmission needs of different wavelengths.

ABS Box PLC Splitter

optical power distribution device based on quartz substrate. It has the characteristics of small size, wide operating splitting. It is especially suitable for passive. In the optical network (EPON, BPON, GPON, etc.), the central office and the terminal device are connected and the optical signal is split.

Micro Tube PLC Splitter

0.9mm loose tube fiber optic splitter, a device used to split and combine light energy. It distributes the light energy transmitted in one fiber to two or more fibers in a predetermined proportion.

LC pigtail

Optic fiber pigtail is a fiber optic cable assamblied at one end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

SC pigtail

Optic fiber pigtail is a fiber optic cable assamblied at one end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

LC assemblies

Optic fiber Patchcord is a fiber optic cable assemblied at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

SC assemblies

Optic fiber Patchcord is a fiber optic cable assemblied at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

FC assemblies

Optic fiber Patchcord is a fiber optic cable assemblied at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

Hybrid assemblies

Optic fiber Patchcord is a fiber optic cable assemblied at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

MPO 8 Cores Microcable Patch Assembly

MPO/MTP truck cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With MPO or US Conec MTP connectors, it is optimized for 40G QSFP+ SR4/CSR4,100G QSFP28 SR4 optics direct connection and high-density data center applications.

MPO 12 Cores Microcable Patch Assembly

MPO/MTP truck cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With MPO or US Conec MTP connectors, it is optimized for 40G QSFP+ SR4/CSR4,100G QSFP28 SR4 optics direct connection and high-density data center applications.

MPO 24 Cores Ferrule Cable Assembly

MPO/MTP truck cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With MPO or US Conec MTP connectors, it is optimized for 40G QSFP+ SR4/CSR4,100G QSFP28 SR4 optics direct connection and high-density data center applications.

2 Core

1 to 4 fibers G.657A1 or G.657A2 250um fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) or Steel wires are placed at two sides. A steel wire as the additional strength member is also applied Then the cable is completed with a black LSZH sheath.

4 Core

1 to 4 fibers G.657A1 or G.657A2 250um fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) or Steel wires are placed at two sides. A steel wire as the additional strength member is also applied Then the cable is completed with a black LSZH sheath.

2 Core

1 to 4 fibers G.657A1 or G.657A2 250um fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) or Steel wires are placed at two sides. Then the cable is completed with a black or white LSZH sheath.

4 Core

1 to 4 fibers G.657A1 or G.657A2 250um fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) or Steel wires are placed at two sides. Then the cable is completed with a black or white LSZH sheath.

Air-blown Fiber Optic Cable

OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um fibers are positioned in a PBT loose tube. Tubes & Fillers (If necessary) are standed around a FRP central strength member into a compact and circular cable core. The cable is completed with Polyethylene (PE) jacket

Figure 8 Fiber Optic cable-Central Loose tube type

2 to 24 fibers OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um Single loose tube metallic Corrugated Steel Tape (CST) armored outdoor self-supporting aerial fiber cable. The messenger part is made up of standed wires as the supporting part,wich is completed with a Polyethylene (PE) sheath to be a figure 8 structure.

Single Jacket Central Loose Tube Dielectric Fiber Optic Cable

2 to 24 fibers OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um Single loose tube non-metallic non-armoured internal/external fiber optic cables with glass yarns strength members, and PE or LSZH jacket.

SLT STA with E-glass Fiber Optic Cable

2 to 24 fibers OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um Single loose tube(SLT) metallic Corrugated Steel Tape armored (STA ) external rodent resistand duct and direct burial cable with glass yarns strength members, and Polyethylene (PE) or LSZH jacket.

Zip Duplex Armored Fiber Optic Patch Cable

Zip Duplex Armored Fiber Optic Patch Cable contains 2 cores 900um tight buffer fibers, SUS flexible spring tube, Aramid yarn strength member and PVC or LSZH jacket. It is with Figure 8 structure.

Round Duplex Armored Fiber Optic Patch Cable

Simplex Armored Fiber Optic Patch Cable contains 1 core 900um tight buffer fiber, SUS flexible spring tube, Aramid yarn strength member and PVC or LSZH jacket.

Simplex Fiber Optic Patch Cable

Simplex fiber optic patch cable contains one 900um tight buffer fiber under the PVC or LSZH jacket with aramid yarn strength members.

Zip Duplex Fiber Optic Patch Cable

Zip duplex fiber optic patch cable contains two 900um tight buffer fibers under the PVC or LSZH jacket with aramid yarn strength members. It is with Figure 8 structure.

Round Duplex Fiber Optic Patch Cable

Round Duplex Fiber Optic Patch Cable contains two 900um tight buffer fibers under the PVC or LSZH jacket with aramid yarn strength members.

Optical Fusion Splicer

It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant & high temperature-resistant. The all-in-one fixture meets fusion demands of multiple optical fibers, jumpers and>rubber-insulted wires with a cladding diameter of 80～150μm.

OTDR

OTDR is mainly used to measure physical characteristics of optical fiber. It can also accurately locate the event point and fault point along the optical fiber line. It has two USB interfaces, which can connect to the external U disk , or communicate with PC through SyncActive software.